Проектування пристрою для демонтажа-монтажа п’ятника вагона

Abstract

UA: В статті проводиться дослідження технологічного процесу демонтажа-монтажа п’ятника вагона. Розглянуті конструкційні особливості та принцип дії перспективних пристроїв, які використовуються при цьому. Запропоновано удосконалення особливостей пристрою для здійснення технологічного процесу демонтажа-монтажа п’ятника, розробленого в умовах депо Основа.

EN: The paper presents the study of the process of dismantling, installation bearing carriage assembly. Considered design features and operating principle promising devices that are used at the same time. Analysis of the feasibility study of existing devices, which are used during the process of dismantling, installation bearing carriage assembly, led to the conclusion that the introduction of these devices in terms of production are significant capital investments. In connection with the improvement suggested design features installation for dismantling, installation bearing carriage assembly developed in a depot basis. The proposed installation allows cut edges rivets special cutter, is not heated bearing carriage assembly car and not deformed part and rivets can be reused. At the same time, the proposed system can be used for the dismantling and removal of bearing carriage assembly from under the car. The existing process provides for the involvement in it of two workers, but with the introduction of the proposed installation of the number of workers can be reduced to a single person. The proposed system for dismantling installation bearing carriage assembly will increase the efficiency of repair of cars in a depot basis. Feasibility study for the proposed introduction will conclude the feasibility designed activities.